12.8V 105Ah Lithium Iron Phosphate battery designed for UPS systems requiring extended runtime.
Features 1344Wh capacity, 100A continuous discharge, built-in intelligent BMS, and direct compatibility
with most 12V UPS units requiring higher capacity.
Brand:
SuperpackItem NO.:
SPF12V105-STProduct Origin:
ChinaColor:
BlackLead Time:
25-30 Working DaysApplicable scenarios of the 12.8V 105Ah LiFePO4 battery:
UPS & Standby Power: Perfect emergency backup for server UPS, medical gear, telecom stations and emergency lights, featuring
stable floating charge for long-term critical equipment operation.
Solar Energy Storage: Stores solar power to supply residential and commercial loads during blackouts or insufficient sunlight.
FAQ – Superpack 12.8V 105Ah LiFePO4 UPS Battery
Q1: Can it replace 12V lead‑acid UPS batteries?
A1: Yes, fits most 12V UPS. Steel case, maintenance‑free. Set charger to 14.6±0.2V lithium mode.
Q2: What about lifespan and safety?
A2: >2000 cycles@1C 100%DOD. Built‑in 100A BMS & DC breaker for safety protection.
Q3: What are charge‑discharge requirements?
A3: Charge:14.6±0.2V(cut‑off 14.8±0.2V), max 50A charge /100A discharge. Avoid lead‑acid float charge.
Q4: RV/solar use? Series‑parallel rules?
A4: Only for UPS backup, not for RV/solar frequent cycling. No series connection; parallel only for same‑batch units.
Q5: Certifications & operating environment?
A5: CE, RoHS, UN38.3, MSDS available. Working temp:0‑45℃, keep well‑ventilated.
Q6: What is 12.8V 105Ah used for?
A6: High‑capacity UPS backup for servers and high‑power industrial equipment. Not for RV/off‑grid solar.
| Item | General Parameter | Remark |
| Rated Capacity | 105Ah |
Standard discharge 0.2C after standard charge 0.2C |
| Minimum Capacity | 98Ah | |
| Nominal Voltage | 12.8V | |
| Life Expectation |
Higher than 80% of the Initial Capacity of the battery |
1)Charge:CC@0.2C to 14.6V, then CV till current to 0.05C |
|
Discharge cut-off voltage |
9.8V~10.8V |
Recommended load cut-off voltage >11.2V |
| Charge cut-off voltage | 14.4V~14.6V | |
|
Cell and assembly method |
IFR32140-15Ah | 4S7P |
| Housing material | SPCC | Spray black |
| Standard charge |
0.2C constant current (CC) charge to 14.6V then constant voltage (CV) 14.6V charge till charge current decline to ≤0.05C |
Charge time : Approx 7h |
| Standard discharge |
Constant current 0.2C, Cut-off voltage 10.8V |
|
|
Maximum Charge Current |
20A@25±3℃ | ≤20A(recommend) |
|
Maximum Continuous Discharge Current |
20A@25±3℃ |
25A <2min |
|
Operation Temperature Range |
Charge : 0~55℃ |
60±25% R.H. |
|
Discharge : -20~60℃ (cell surface temperature≤80℃)
|
||
|
Storage Temperature Range |
Less than 6 months : 0~25℃(SOC≥50%) |
60±25% R.H. |
|
Less than 3 months:-20~35℃(SOC≥50%) |
||
| Approx. Weight | 11.4±0.3kg | |
| Internal resistance | ≤35mΩ | 1KHz,AC |
| Dimension | L*W*H=(310*120*180)±2mm | |
| Terminals | XT60H-F,Female connector, yellow |
UL1015 10AWG 500±10mm |
| Series and parallel | Maximum 4 parallel | |
| IP Rating | IP54 | |
| Communication | RS485 isolated |