12.8V 45Ah LiFePO4 battery, 2000 cycles, max 50A continuous discharge. Built-in BMS,
ABS+PC flame-retardant housing. Lightweight 4.47kg, ideal for solar, RV, marine and
backup power. Drop-in lead acid replacement.
Brand:
SuperpackItem NO.:
SPF12V45-SMProduct Origin:
ChinaColor:
BlueLead Time:
25-30 Working DaysThis 12.8V 45Ah LiFePO4 battery (576Wh) uses IFR32140 cells in 4S3P structure. Built-in BMS provides multi-protection. It delivers stable power with 2000 service cycles.
Perfect for off-grid solar, RV, boat, UPS emergency backup. Notice: Use 14.4~14.6V LiFePO4 charger. Recommended cut-off ≥11.2V.
FAQ
Q1: What is its cycle life?
A1: 2000 cycles, retains over 80% initial capacity.
Q2: Max discharge current?
A2: 50A continuous, 60A peak within 10s.
Q3: What charging voltage to use?
A3: 14.4V–14.6V, use LiFePO4 dedicated charger.
Q4: Working temperature range?
A4: Charge:0–45℃; Discharge:-20–60℃.
Q5: Case material & size?
A5: ABS+PC 94-V0. L195×W131.5×H182.7mm, 4.47kg.
Q6: Can it replace lead-acid battery?
A6: Yes, but lithium charger is required.
| Item | General Parameter | Remark |
| Rated Capacity | 45.0Ah |
Standard discharge 0.2C after standard charge 0.2C |
| Minimum Capacity | 42.75Ah | |
| Nominal Voltage | 12.8V | |
| Life Expectation |
Higher than 80% of the Initial Capacity of the battery |
1)Charge:CC@0.2C to 14.6V, then CV till current to 0.05C |
|
Discharge cut-off voltage |
Module :9.2V~10.8V |
Recommended load cut-off voltage ≥11.2V |
| Charge cut-off voltage | 14.4V~14.6V | |
|
Cell and assembly method |
IFR32140 3.2V 15Ah | 4S3P |
| Housing material | ABS+PC |
94-V0 |
| Standard charge |
0.2C constant current (CC) charge to 14.6V then constant voltage (CV) 14.6V charge till charge current decline to ≤0.05C |
Charge time : Approx 7h |
| Standard discharge |
Constant current 0.2C,Cut-off voltage 10.0V |
|
|
Maximum Charge Current |
22.5A@25℃±2℃ | (recommend)≤9A |
|
Maximum Continuous Discharge Current |
50A@25℃±2℃ |
Peak current 60A<10S |
|
Operation Temperature Range |
Charge : 0℃~45℃ |
60±25% R.H. |
|
Discharge : -20℃~60℃
|
||
|
Storage Temperature Range |
Less than 6 months : 0~25℃(SOC≥50%) |
60±25% R.H. |
|
Less than 3 months:-5~35℃(SOC≥50%) |
||
| Approx. Weight | 4.47kg±0.3kg |
The sample housing is 3D printed |
| Internal resistance | 5mΩ≤ACR≤20mΩ@50%SOC | 1KHz,AC |
| Dimension |
L*W*H=(195*131.5*182.7mm)±2mm |
|
| Terminals | M6*1.0 3.99±20%N.M |